Robots – efirms.shop

Bandai Gundam Decal No.46 for 1/60 1/100/ 1/144 MS Gundam OO Series

pkversion — Thu, 26 Sep 2024 19:40:02 +0000

Kotobukiya Hexa Gear 1/24 Abysscrawler Night Stalkers Ver. Plastic Model

pkversion — Thu, 26 Sep 2024 19:29:23 +0000

Size: L150mm

Combat preparation complete. Start your engines.

Model Information:

ABYSS CRAWLER is a third-gen HEXA GEAR developed by the Liberty Alliance.

It was developed to explore and control blocked terrain such as culverts. Unlike other third-gen HEXA GEAR, it has two Zoatex modes and is characterized by its continuous use of Zoatex.

At the beginning of the war, cities were raided by unmanned HEXA GEAR called HIDESTORMs. Further investigations uncovered numerous ginormous underground tunnels and facilities from the past that were used to carry out these attacks. As such, the Liberty Alliance urgently required a full-scale survey. However, all information about the geological patterns of these underground structures barring simple outlines, was lost, and to make matters worse, the areas had already fallen into enemy hands, with MSG Valiant Force HEXA GEARS and droids roaming the tunnels.

Hidestorms, with their capabilities in electronic warfare thanks to their VIC Blades and other weapons, greatly threatened the Liberty Alliance’s coordination from underground by exposing communication lines, repeaters, and power lines that connected the cities. Liberty Alliance realized the need to take back the underground tunnels and hastily developed a HEXA GEAR unit with the express purpose of taking on the task.

In developing the unit, the wreckage of the destroyed Hidestorm was recovered and its frame was repurposed and reused. However, as there was little prospect of reproducing the capabilities of the VIC Blade, or controlling or disabling it, the next best countermeasure was taken. The result was the creation of the Invasion Counter Shield, commonly known as ICS, equipped on the left arm of every unit. Due to a chronic shortage of parts, only a small number of these units were produced and subsequently sent into the darkness of the underground tunnels in squads. There were countless heavily contaminated underground areas due to the use of crystalline reactors categorized as Level 6 – Abyss, where even the worst of areas of the surface could hardly hold a candle to them. Abyss Crawlers waded through the sludge and grime, sometimes engaging with Hidestorms, small droids, and other unseen battles.

Weapons:

– ICS (Invasion Counter Shield)

– Biting Scissors

– Flame Thrower

– Blast Recon

– Head Anchor

Model Specifications:

– The model and armor parts are of a black coloration similar to LORD IMPULSE and BULKARMβ “LUMBERJACK” making it easy to assemble without painting.

– The model system can convert between “Formation 1” which emphasizes combat, or “Formation 2,” which emphasizes mobility.

– The effect parts for the ICS equipped to the Biting Scissors on the left arm are detachable.

– The ICS effect parts are made of clear orange plastic, giving the model a unique and realistic appearance.

– The Biting Scissors on the left arm can be opened and closed to create a variety of battle poses.

– The secondary “Head Anchor” can be displayed in a variety of configurations.

– The roll bars on the skid units on the legs can be opened and closed.

– A separately sold Governor unit can be loaded in the model’s cockpit.

Included Items:

– Head Anchor Effect Part x1

– Wire x1

– Biting Scissors ICS Effect Part x1

*The biting scissors effect part can be placed on either the left or right arm.

– Archive Card x1

(This item is a reproduction.)

Aoshima 1/43 ACKS MP-02 Patlabor Type 98 Special Command Vehicle Set of 2 Plastic Model

pkversion — Thu, 26 Sep 2024 19:25:06 +0000

This is a plastic model kit, and assembly is required.

Size: Approx. H40mm

Includes:

– 3x guard robot [BEL-1999 Cardia]

– 3x character figures (Asuma Shinohara, Kanuka Clancy, and Takeo Kumagami)

– Decals

Hasegawa 1/20 Maschinen Krieger LUM-168 Camel Plastic Model

pkversion — Thu, 26 Sep 2024 19:20:42 +0000

This is a plastic model, and assembly is required.

Size: Approx. L222mm x W163mm

Doyusha Transformers Bumblebee Plastic Kit

pkversion — Thu, 26 Sep 2024 18:19:01 +0000

This is a plastic model kit and assembly is required.

-Total length: Approximately 9.1 cm

-With display stand

-No adhesive required

-Partially painted

Kotobukiya KP461R Soukou Musume LBCS Achilles Mikazuki Karina Plastic Model

pkversion — Thu, 26 Sep 2024 17:53:39 +0000

Height is approx. 155mm

Kotobukiya HG061 Hexa Gear Governor Warmage Hetzer 1/24 Scale Kit

pkversion — Thu, 26 Sep 2024 17:50:47 +0000

This is a plastic model kit and Assembly is required.

Model Specifications:
– This model is 76mm in size and has 28 points of articulation for creating many various poses.
– The neck joint can move forward and backward to create a wide variety of poses such as “chin tuck” and “facing upward diagonally.”
- The ankle joints are moveable for extra stability when standing.
- The main sensor part on the front of its head is made with a pre-painted part, which can also be exchanged for one with the optional “Multitracker” part attached.
- The included two submachine guns can be attached to the model’s thighs through attachment parts.
- Various parts can be attached to the 3mm connecting joints built in the connector part on the HEXA G-R.A.M. piece on the back of the model, the thighs, and the lower back hip.
- Using the included “expansion attachment” for the forearm, users can attach parts that have 3mm connecting joints.
- The color scheme of this model is light brown, warm gray, light gray, dark gray, and black.

Included Items:
- Submachine Gun x2
- Mount Parts for Submachine Gun x2
- Optional Part “Multitracker” for Head x1
– Expansion Attachment for Forearm x1
- Left and Right Wrist Parts (Closed, Open, Weapon Holding)
- PVC HEXA G-R.A.M. x1
- Archive Card x1

Kotobukiya M.S.G Modeling Support Goods Heavy Weapon Unit MH24 Alnair Rod

pkversion — Thu, 26 Sep 2024 16:14:50 +0000

Size is approx. 228 mm.

-Great design compatibility with character plastic models! Introducing a large magical weapon that can be transformed!
-Following the previous work Magia Blade, it is a heavy weapon unit with a design that fuses science fiction and fantasy that further enhances the design compatibility with characters.
-Large magic wand “Al Nile Rod” can be recombined into various weapons such as spears, sickles, and armor.
-In addition, it is possible to make the core of the central base emit light by incorporating an optional milite (lithium battery with LED).
-The included magic team effect parts have different sizes and shapes for large, medium and small, and since a 3mm joint is provided in the center, it reproduces impressive scenes such as animation, games, manga, etc. together with Alnile rod. It is also an item that you can enjoy a wide range of customs such as using it as an accent part for robot mecha.

【gimmick】
-It is a weapon that can be changed from large magic wand to various styles such as spear, sickle, wing unit by recombination.
-The optional Milite series (lithium battery with LED) can be incorporated into the base of the main unit, and the core parts in the center of the main unit can be made to emit light.
*Only compatible with the MIRAIT 316 and MIRAIT 327 series.
-Magic team type effect parts are molded in clear green, large, medium, small size, different types are attached, and each can be recombined with a 3 mm joint in the center.
-The circle-shaped part of the rod can be connected indefinitely with the included general-purpose 3 mm joint, and it is a part that you can enjoy various customizations such as horns, blades, armor to large wing parts individually or in multiple.

【accessories】
・Alnile rod x 1
・Magic team (large) x 1
・Magic team (medium) x 1
・Magic team (small) x 3
・Short grip x 1
・FA long grip x 1
・FA short grip x 1
・General-purpose 3mm joint x 5

*the above is an automatic translation.

Good Smile Company The Gattai Ryujin DX Dynazenon Action Figure (SSSS.DYNAZENON)

pkversion — Thu, 26 Sep 2024 16:11:40 +0000

From “SSSS.DYNAZENON” comes a rerelease of the deluxe combinable toy of Dynazenon!

- The pre-painted ABS complete robot stands at approximately 250mm.

- The Dyna Soldier, Dyna Wing, Dyna Striker and Dyna Diver mecha can all be combined to create the Dynazenon and Dyna Rex combinations.

- Dyna Soldier can be combined with each other mecha.

- Equipped with automatic leg missile hatch deployment system. Full Burst Mode can also be recreated.

- Each joint’s wide range of articulation makes it possible to create dynamic action poses.

- The Dyna Saber is included as well, and has been recreated with translucent parts.

- Interchangeable hand parts are included along with a special stand base.

At long last, a new mecha toy to captivate the hearts of fans everywhere is here!

Painted ABS non-scale action figure with stand included. Approximately 250mm in height to top of head (when standing upright).

Plum 1/144 Vic Viper ver. Gradius V Plastic Model

pkversion — Thu, 26 Sep 2024 15:14:56 +0000

Size: Approx. L150mm

*Please note that this is a plastic model kit which requires tools and paint to assemble.